AUTOMATIC WHEEL ALIGHMENT SYSTEM

Abstract

The main objective of our project is to design and fabrication of Automatic Wheel alignment system. Alignment of an automatic wheel vehicle is as far as possible, arranged so that the front wheels will roll truly without any lateral slip. The front wheels are supported on front axle so that they can swing to the left or right for alignment. This movement is produced by gearing and linkage between the alignment wheel in front of the driver and the alignment knuckle and wheel. The complete arrangement is called the alignment system. In this project, the rear wheels turn in a direction opposite to the front wheels so that to reduce the turning circle radius at low speeds. This would be very useful in city traffic conditions.

Existing System

Proposed System

Architecture

Block Diagram

Line Diagram