Online Monitoring and Controlling of Boiler Temperature, Flow and Level Using Wireless System

Abstract

In boilers, the temperature may be sometimes very high. Also the water level will be low so that it causes many problems. To avoid this, we use a safety control for power plant units. It consists of three parts. Temperature sensor, level sensor and Micro Controller. The temperature sensor and level sensor are connected at the boiler. The temperature sensor senses the temperature and sends signal to the microcontroller unit. Also the level sensor senses the water level of the boiler and sends signal to the microcontroller. The microcontroller analyses the signals and if the temperature exceeds a particular limit, it operates a cooling fan. Also if the water level goes low, the microcontroller operates the pump motor. The microcontroller sends the signal to PC through ZIGBEE. Thus this project prevents the boiler from unnecessary burning. The microcontroller program is written in assembly language, and the microcontroller used is PIC16F877A.

Existing System

Proposed System

Architecture

BLOCK DIAGRAM

REMOTE MONITORING