GEAR MECHANISM TO CONTROL PROPELLER SHAFT

Abstract

Normally while moving the vehicle with first gear, if the road is slope down back, the vehicle may tend to move backward. The driver feels very difficult to move the vehicle forward. Because the brake and accelerator lever are handled by right leg. Sometimes the vehicle may dash the back side vehicle if the driver is not enough experience. This project overcomes the difficulty of backward moving. When first gear is activated, a free wheel setup is connected with the propeller shaft. The freewheel system only allows the vehicle to move forward and not backward. Thus the driver can move the vehicle forward without any difficulty.

Existing System

Proposed System

Architecture

Block Diagram

Line Diagram