FABRICATION OF PNEUMATIC AUTO-FEED RIVETING MACHINE

Abstract

The pneumatic system has gained a large amount of importance in last few decades. This importance is due to its accuracy and cost. This convenience in operating the pneumatic system has made us to design and fabricate this unit as our project. This unit, as we hope that it can be operated easily with semi-skilled operators. The pneumatic auto feed riveting machine has an advantage of working in low pressure. The main objective of this project is to fabricate a pneumatic riveting system. In this method less man power is used to operate the cylinder. In old method thick sheet metals are kept and a high man power is used to rivet the joints. But in this method the user needs to operate a switch only. If the user operates a switch the rivet is done in the sheet joint. This requires less cost to fabricate. It requires less EB power to operate.

Existing System

Proposed System

Architecture

BLOCK DIAGRAM

LINE DIAGRAM